Pre-Owned 50W CO2 Laser Engraver Cutting Machine with 12” x 20” Working Area and Rotary Axis

Pre-Owned 50W CO2 Laser Engraver Cutting Machine with 12” x 20” Working Area and Rotary Axis

Regular price $1,799.99 Sale price $1,259.99 Save $540

Shipping calculated at checkout.

Financing is not available for pre-owned units

Important Resources and downloads:


    Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended.

    Good: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended.

    Great: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device has minimal signs of use but is fully operational and functions 100% as intended.

    PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine.

    OMTech Certified:

    This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance.

    Photo Guide:

    View condition examples of previous Pre-Owned models: Click Here

    Safe Shipping:

    This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

    Convenient Size:

    • 11.5” x 19.5” (295 x 495mm) engraving/cutting area
    • 40” x 26” x 25” (102 x 65 x 63cm) overall dimensions
    • Tackle large-scale projects with ease.
    • An adjustable stabilizing base allows easy height adjustment.


    • Recommended engraving speed: 100 - 500mm/s
    • Recommended cutting speed: 1 - 30mm/s (actual speed depends on material)
    • 18mm Focal lens diameter
    • 25mm Mirror diameter
    • Resolution up to 2540 dpi
    • 8” Max Z-depth (Maximum workspace height above workbed)


    • The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included)
    • RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista.
    • The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)
    • Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing. 
    • 4-Pin Port connection for rotary axis devices


    • The integrated power supply features increased response speed, performance, and cutting power - it’s beaming with possibilities!
    • Cut up to 1/2" thick plywood and acrylic/plexiglass
    • Uses standard 110V AC power connection

    Average Parameter Settings: Click Here


    • Materialize your vision: Our CO2 lasers are capable of engraving materials such as wood, glass, leather, coated metals (anodized aluminum), and acrylic. 
    • Uncoated metal etching requires a laser spray pre-treatment.

    Cutting Edge Features:

    • RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8.
    • USB PORT: A USB port allows flash drive connectivity and a USB-to-USB PC connection.
    • LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. 
    • ROTARY AXIS INCLUDED: Easily engrave irregular and cylindrical surfaces like cups and bottles.
    • VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure.
    • RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.
    • ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75” or be fully retracted, allowing more control over different focal distance setups.
    • AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
    • BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.
    • WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60–70°F (16–21°C).
    • WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. 
    • AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation.

    Package Includes:

    • 1 x Laser Engraver Machine
    • 1 x Rotary Axis Attachment
    • 1 x Water Pump
    • 1 x Exhaust Fan
    • 1 x Venting Exhaust Duct (4 ft. max. length)
    • 1 x 50W Laser Tube
    • 1 x Accessory Bag
    • 1 x USB Type-A to Type-A Cable
    • 1 x 4G USB Drive with Software
    • 1 x Power Cord
    • 1 x Wrench
    • 1 x Key
    • 1 x Instruction Manual

    OMTech Certified Warranty:

    • We offer a 1-year parts warranty on all pre-owned machines.
    • 3-month warranty on all OMTech Certified laser tubes and power supplies.


      • FDA Compliant
      • CE Certification
      • ISO9001 Quality Certification
      • One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California


          6L CW-5200 Chiller - Industrial Water Chiller Machine - Laser Water Cooler
          1/16" Duets by Gemini Acrylic 12" x 24" Sheets for Laser Engraver Machine - 4pc
          light burn software k40 lightburn mac laser engraver software
          LIGHTBURN SOFTWARE DOWNLOAD for CO2 Laser Engraver Cutter
          XL300 330W 5-Stage Filter Fume Extractor and Air Purifier for Laser Engraver Cutting Machine
          Inline Duct Fan
          4"/6" Inline Duct Fan for Laser Engraver Cutter with Continuously Variable Speed Controller
          from $69.99
          4-Wheel Rotary Axis with 360 Degree Rotation for 50W and up CO2 Laser Engraver Cutting Machine
          PiBurn Laser Rotary Attachment 4.0 (PiBurn V4.0) from Lens Digital
          from $898.99
          American Photonics CO2 Laser Alignment Tool
          American Photonics
          American Photonics CO2 Laser Alignment Tool for Optical Precision
          LightBurn Course - Engraver's Choice
          LightBurn Full Course - OMTech Laser
          Laser with LightBurn Full Course - Provided by partner, Engraver's Choice