Pre-Owned AF3555-130 - 130W CO2 Laser Engraver Cutting Machine with 35” x 55” Working Area (with Auto Focus)

Pre-Owned AF3555-130 - 130W CO2 Laser Engraver Cutting Machine with 35” x 55” Working Area (with Auto Focus)

Regular price $7,399.99 Sale price $5,999.99 Save $1,400

Shipping calculated at checkout.

Financing is not available for pre-owned units

Important Resources and downloads:


Functional: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear and/or structural damage, but is fully operational and functions 100% as intended.

Good: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some cosmetic wear and/or signs of use but is fully operational and functions 100% as intended.

Great: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device has minimal signs of use but is fully operational and functions 100% as intended.

PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine.

OMTech Certified:

This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance.

Photo Guide:

View condition examples of previous Pre-Owned models: Click Here

Safe Shipping:

This unit is carefully secured to a reinforced pallet and protected with several layers of bubble wrap for a dependable delivery.

Convenient Size:

  • 34.5” x 54.5” (875 x 1385mm) engraving/cutting area
  • 79” x 61” x 39” (200 x 154 x 100cm) overall dimensions
  • Net Weight 750 lbs. (340 kg)
  • Tackle large-scale projects with ease
  • An adjustable stabilizing base allows easy height adjustment.


  • Engraving speed: 100 - 600 mm/s
  • Cutting speed: 1 - 40mm/s (actual speed depends on material)
  • 20mm Focal lens diameter
  • 2" Focal length
  • 25mm Mirror diameter
  • Resolution up to 2540 dpi
  • 7” Standard Z-depth (Workspace height with honeycomb bed installed and laser head half retracted)
  • 8” Max Z-depth (Workspace height with honeycomb bed removed, knife bed in use, and laser head fully retracted upwards)


  • The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included)
  • RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista.
  • The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)
  • Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing. 
  • 4-Pin Port connection for rotary axis devices. *Honeycomb bed and the knife bed removal required for 4 Wheel Rotary or Jaw Chuck rotary device use


  • The integrated power supply features increased response speed, performance, and cutting power — it’s beaming with possibilities!
  • Cut up to 12 mm (½″) thick plywood and acrylic/plexiglass
  • Uses standard 110V AC power connection

Laser Tube Lifetime:

  • 130W CO2 laser tube with an estimated lifetime of up to 12,000 operation hours depending on power setting usage and water cooling performance
  • PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows:
  • Low Power 10–40% = 11,000–12,000 Hours
  • Moderate Power 40–70% = 9,000–10,000 Hours
  • High Power 70–100% = 6,000–7,000 Hours

Average Parameter Settings: Click Here

    Cutting Edge Features:

    • SUPERIOR LASER POWER: This laser engraving and cutting machine comes with a YL 130W CO2 laser tube to cut through thicker materials and engrave your designs faster, deeper, and clearer.
    • RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8.
    • USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs.
    • LCD DISPLAY: A secondary display panel monitors the real-time electric current in milliamps and auto-judges fault, easing the troubleshooting process and reducing potential damage to the laser tube and power supply. Plus, it’s accessibly located on the left side of the machine.
    • LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life. 
    • MOTORIZED AUTOFOCUS WORKBED: The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height.
    • VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure.
    • RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.
    • ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75” or be fully retracted, allowing more control over different focal distance setups.
    • AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
    • FOUR-WAY PASS-THROUGH: There’s always extra room! Equipped with front, side, and rear pass-through doors to accommodate materials larger than the table size. Front-to-Back Doors: 58.5"W x 1.88"H, Side-to-Side Doors: 38"W x 0.75"H
    • BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.
    • WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. 
    • AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation.
    • EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machine’s cleanliness and easing the cleanup process.

    Package Includes:

    • 1 x Laser Engraver Machine
    • 10 x Hex Wrenches
    • 1 x Ground Wire
    • 1 x USB Type-A to Type-A Cable
    • 1 x Ethernet to Ethernet Cable
    • 1 x Power Cord
    • 1 x Tube of Silicone Insulation
    • 1 x Roll of Double-Sided Tape
    • 1 x Venting Exhaust Duct (4 ft. max. length)
    • 1 x Hose Clamp
    • 2 x Water Hoses
    • 2 x Keys
    • 1 x 4G USB Drive with Software
    • 1 x Accessory Bag
    • 1 x Instruction Manual

    OMTech Certified Warranty:

    • Great: 1-year warranty on machine parts and hardware, 3-month warranty on laser tubes and power supplies
    • Good: 6-month warranty on machine parts and hardware, 3-month warranty on laser tubes and power supplies
    • Functional: 3-month warranty on machine parts and hardware, 1-month warranty on laser tubes and power supplies


      • FDA Compliant
      • CE Certification
      • ISO9001 Quality Certification
      • One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California

      Compatible Materials:

      Laser Cutting:

      • Acrylic
      • *Wood
      • Leather
      • Plastics
      • Fabrics
      • MDF
      • Cardboard
      • Paper
      • Corian
      • Foam
      • Fiberglass
      • Rubber


      • Acrylic
      • Wood 
      • Leather
      • Plastics
      • Fabrics
      • Glass
      • Rubber
      • Cork
      • Brick
      • Granite
      • Marble
      • Tile
      • River Rock
      • Bone
      • Melamine
      • Phenolic
      • *Aluminum
      • *Stainless Steel
      • *Titanium

      *Cannot cut hardwoods like mahogany

      *CO2 lasers only mark bare metals when anodized or treated.

      Contact us with questions on specific materials not listed, we can process a sample for confirmation.

      Some PVC-based acrylics can create toxic fumes when lasered.


          6L CW-5200 Chiller - Industrial Water Chiller Machine - Laser Water Cooler
          6L Industrial Single Water Chiller for 50W-150W CO2 Laser Engraver Machines
          1/16" Duets by Gemini Acrylic 12" x 24" Sheets for Laser Engraver Machine - 4pc
          light burn software k40 lightburn mac laser engraver software
          LIGHTBURN SOFTWARE DOWNLOAD for CO2 Laser Engraver Cutter
          XL300 330W 5-Stage Filter Fume Extractor and Air Purifier for Laser Engraver Cutting Machine
          4"/6" Inline Duct Fan for Laser Engraver Cutter with Continuously Variable Speed Controller
          from $69.99
          PiBurn Laser Rotary Attachment 4.0 (PiBurn V4.0) from Lens Digital
          from $898.99
          American Photonics CO2 Laser Alignment Tool
          American Photonics
          American Photonics CO2 Laser Alignment Tool for Optical Precision
          LightBurn Course - Engraver's Choice
          LightBurn Full Course - OMTech Laser
          Laser with LightBurn Full Course - Provided by partner, Engraver's Choice