150W CO2 Laser Engraver Cutting Machine with 40” x 63” Working Area (with Water Chiller and Auto Focus)

Regular price $6,999.99 Sale price $6,554.99
/
Shipping calculated at checkout.
Finance with Balboa Capital Financing options are available for purchases of $3,000.00 USD and above.

SKU: USB-GB16-US

Convenient Size:

  • 40" x 63" (1000 x 1600 mm) engraving area
  • 80.6" x 60.6" x 37" (220 x 154 x 94 cm) overall dimensions
  • Tackle large-scale projects with ease
  • Adjustable base for stabilization allows you to take control and adjust the height.

Specs:

  • Engraving speed: 100 - 600mm/s 
  • Cutting speed: 1 - 40mm/s (actual speed depends on material)
  • 20mm Focal lens diameter
  • 2.5” Focal length
  • 25mm Mirror diameter
  • Resolution up to 2540 dpi
  • 7” Standard Z-depth (Workspace height with honeycomb bed installed and laser head half retracted)
  • 8” Max Z-depth (Workspace height with honeycomb bed removed, knife bed in use, and laser head fully retracted upwards)

Compatibility:

  • Perfectly compatible with Windows 7, 8, and 10 (64/32 bit), XP, 2000, and Vista
  • Compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)
  • Ruida control board with RDWorks (included) is compatible with LightBurn (not included) and CorelLaser (not included)
  • Photo-ready for images in HPLG, BMP, GIF, JPG, JPEG, DXF, DST, and AI formats, and more
  • 4-Pin Port for rotary axis devices

Power:

  • The integrated power supply features increased response speed, performance, and cutting power - it’s beaming with possibilities!
  • 150W CO2 laser tube with an estimated lifetime of 2,000-8,000 operation hours depending on power setting usage and water cooling performance
  • Cut up to 1.5" thick plywood and acrylic/plexiglass.
  • PLEASE NOTE: Using laser power above 70% will shorten the lifespan of the laser tube.

Average Parameter Settings: Click Here

Application-Friendly:

  • Materialize your vision: Our CO2 lasers are capable of engraving materials such as wood, glass, leather, and acrylic. 
  • Metal etching requires a laser spray pre-treatment.

Cutting Edge Features:

  • SUPERIOR LASER POWER: This laser engraving and cutting machine comes with a monstrous 150W CO2 laser tube to cut through thicker materials and engrave your designs faster, deeper, and clearer.

  • WATER CHILLER INCLUDED: The industrial-strength CW-5200 water chiller (1.6 gallon/6L capacity) keeps your laser tube cool through long workdays, protecting your tube’s integrity.

  • RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display provides complete control over the laser marking process via Windows-compatible RDWorks v8.

  • MOTORIZED AUTOFOCUS WORKBED: The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height.

  • RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.

  • VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process; plus, it’s equipped with a sepia tint to protect your eyes from direct laser beam contact.

  • AIR ASSIST: A small air compressor mounted on the laser head removes debris, heat, and combustible gases from the engraving surface, keeping your workbed cleaner and your engraving results more precise.

  • BUILT-IN VENTILATION: A pre-installed vent fan removes harmful laser debris and creates a safer workspace, extending the service life of your machine.

  • FOUR-WAY PASS-THROUGH: There’s always extra room! Equipped with front, side, and rear pass-through doors to accommodate materials larger than the table size.

  • LCD DISPLAY: A secondary display panel monitors the real-time electric current in milliamps and auto-judges fault, easing the troubleshooting process and reducing potential damage to the laser tube and power supply. Plus, it’s accessibly located on the left side of the machine.

  • EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machine’s cleanliness easing the cleanup process.

  • AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation.

Package Includes:

  • 1 x Laser Engraver
  • 1 x 150W Laser Tube
  • 10 x Hex Wrenches
  • 1 x Grounding Wire
  • 1 x USB Cable
  • 1 x Ethernet Cable
  • 1 x Power Cord
  • 1 x Water Chiller
  • 1 x Acrylic Focus Tool
  • 1 x Tube of Silicone Insulation
  • 1 x Roll of Double-Sided Tape
  • 2 x Exhaust Pipes
  • 1 x Hose Clamp
  • 1 x Water Pipe
  • 2 x Keys
  • 1 x USB Flash Drive (with Software)
  • 1 x Rotary Axis (optional)
  • 1 x Instruction Manual

Warranty:

  • No need to worry! We offer a 2-year warranty on all machines.
  • 1-year warranty on consumables (i.e. laser tube and power supply)

Certifications:

  • FDA Compliant
  • CE Certification
  • ISO9001 Quality Certification
  • Access to our Virtual Tech Support Line with OMTech Specialists in Anaheim, California