REFURBISHED MF2436-80 - 80W CO2 Laser Engraver Cutting Machine with 24" x 36" Working Area (2019 version)

Regular price $4,099.99 Sale price $3,649.99
/
Shipping calculated at checkout.

SKU: USB-8B69-US

Do you want to visit an OMTech machine in person? Schedule a Demo Room visit here

Condition:

Good: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear but is fully operational and functions 100% as intended.

Great: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of use but is fully operational and functions 100% as intended.

Like New: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device has minimal signs of use but is fully operational and functions 100% as intended.

PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine.

OMTech Certified:

This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been repaired and tested for full operational performance.

Convenient Size:

  • 24” x 36” (610 x 915mm) engraving area
  • 57” x 42” x 38” (145 x 107 x 97cm) overall dimensions
  • Tackle larger-scale projects with ease
  • An adjustable stabilizing base allows easy height adjustment.

Specs:

  • Recommended engraving speed: 100 - 500mm/s
  • Recommended cutting speed: 1 - 30mm/s (actual speed depends on material)
  • 18mm Focal lens diameter
  • 25mm Mirror diameter
  • Resolution up to 2540 dpi
  • 7” Standard Z-depth (Workspace height with honeycomb bed installed and laser head half retracted)
  • 8” Max Z-depth (Workspace height with honeycomb bed removed, knife bed in use, and laser head fully retracted upwards)

Compatibility:

  • The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included)
  • RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista.
  • The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)
  • Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing. 
  • 4-Pin Port connection for rotary axis devices. *Honeycomb bed and the knife bed removal required for 4-Wheel Rotary or Jaw Chuck Rotary Device use

Power:

  • The integrated power supply features increased response speed, performance, and cutting power - it’s beaming with possibilities!
  • A secondary LCD display panel monitors the electric current and auto-judges fault, reducing potential damage to the laser tube and power supply.
  • Cut up to 9 mm (.35″) thick plywood and acrylic/plexiglass
  • Uses standard 110V AC power connection

Laser Tube Lifetime:

  • 80W CO2 laser tube with an estimated lifetime of up to 8,000 operation hours depending on power setting usage and water cooling performance
  • PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows:
  • Low Power 10–40% = 7,000–8,000 Hours
  • Moderate Power 40–70% = 5,000–6,500 Hours
  • High Power 70–100% = 3,000–4,000 Hours

Average Parameter Settings: Click Here

    Cutting Edge Features:

    • RUIDA DIGITAL CONTROLLER: The intuitive control panel with digital display allows adjustment of laser head positions and power dimensions, as well as document viewing and final image edits.
    • VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process, plus, it’s equipped with a sepia tint, protecting your eyes from direct laser beam contact.
    • BUILT-IN VENTILATION: A pre-installed vent fan removes harmful laser debris and creates a safer workspace, extending the service life of your machine.
    • AIR ASSIST: A small air compressor mounted on the laser head removes debris, heat, and combustible gases from the engraving surface.
    • RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup.
    • TWO-WAY PASS-THROUGH: There’s always extra room! Equipped with front and rear pass-through doors to accommodate materials larger than the table size.
    • EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machine’s cleanliness easing the cleanup process.
    • AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation.
    • WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60–70°F (16–21°C).
    • WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. 

    Package Includes:

    • 1 x Laser Engraver Machine
    • 1 x Water Pump
    • 1 x Storage Tank
    • 1 x Network Cable
    • 1 x Grounding Wire
    • 1 x Vent Duct
    • 2 x Water Hose
    • 1 x User Manual
    • 1 x USB Stick with Software
    • 1 x Stainless Steel Clamp
    • 10 x Allen Wrenches
    • 1 x Double-sided Tape
    • 1 x Power Cord
    • 1 x Accessory Bag
    • 2 x Keys
    • 1 x Silicone Sealant

    Warranty:

    • No need to worry! We offer a 2-year warranty on all machines.
    • 1-year warranty on consumables (i.e. laser tube and power supply)

    Certifications:

    • FDA Compliant
    • CE Certification
    • ISO9001 Quality Certification
    • Access to our Virtual Tech Support Line with OMTech Specialists in Anaheim, California

    Compatible Materials:

    Laser Cutting:

    • Acrylic
    • *Wood
    • Leather
    • Plastics
    • Fabrics
    • MDF
    • Cardboard
    • Paper
    • Corian
    • Foam
    • Fiberglass
    • Rubber

    Marking/Engraving:

    • Acrylic
    • Wood 
    • Leather
    • Plastics
    • Fabrics
    • Glass
    • Rubber
    • Cork
    • Brick
    • Granite
    • Marble
    • Tile
    • River Rock
    • Bone
    • Melamine
    • Phenolic
    • *Aluminum
    • *Stainless Steel
    • *Titanium

    *Cannot cut hardwoods like mahogany

    *CO2 lasers only mark bare metals when anodized or treated.

    Contact us with questions on specific materials not listed, we can process a sample for confirmation.

    Some PVC-based acrylics can create toxic fumes when lasered.