Refurbished ZF2435-100 - 100W CO2 Laser Engraver Cutting Machine with 24"x35" Working Area

Regular price $4,999.99 Sale price $3,399.99
/
Shipping calculated at checkout.

Do you want to visit an OMTech machine in person? Schedule a Demo Room visit here

Condition:

Good: This machine has been previously owned, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of cosmetic wear but is fully operational and functions 100% as intended.

Great: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device may have some signs of use but is fully operational and functions 100% as intended.

Like New: This machine has been previously used, returned to the Anaheim headquarters, and repaired and tested by OMTech Specialists. The device has minimal signs of use but is fully operational and functions 100% as intended.

PLEASE NOTE: The images shown in this listing do not fully represent the cosmetic condition of the machine.

OMTech Certified:

This machine has undergone a thorough QA inspection by an OMTech Specialist, and each component has been tested and optimized for full operational performance.

Convenient Size:

  • 24” x 35” (600 x 900mm) engraving area
  • 65” x 42” x 37.8” (165 x 107 x 96cm) overall dimensions
  • Tackle large-scale projects with ease.
  • Adjustable base for stabilization, allowing you to take control and adjust the height.

Specs:

  • Recommended engraving speed: 100 - 500mm/s
  • Recommended cutting speed: 1 - 30mm/s (actual speed depends on material)
  • 18mm Focal lens diameter
  • 2" Focal length
  • 25mm Mirror diameter
  • Resolution up to 2540 dpi

Compatibility:

  • The Ruida control board works seamlessly with RDWorks for Windows PC (included) and LightBurn (not included)
  • RDWorks (included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista.
  • The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)
  • Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing. 
  • 4-Pin Port connection for rotary axis devices. *Honeycomb bed and the knife bed removal required for 4 Wheel Rotary or Jaw Chuck rotary device use

Power:

  • The integrated power supply features increased response speed, performance, and cutting power - it’s beaming with possibilities!
  • Cut up to 10 mm (⅖″) thick acrylic/plexiglass
  • Uses standard 110V AC power connection

Laser Tube Lifetime:

  • 100W CO2 laser tube with an estimated lifetime of up to 12,000 operation hours depending on power setting usage and water cooling performance
  • PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows:
  • Low Power 10–40% = 11,000–12,000 Hours
  • Moderate Power 40–70% = 8,000–10,000 Hours
  • High Power 70–100% = 4,500–5,000 Hours

Average Parameter Settings: Click Here

    Cutting Edge Features:

    • HIGH LASER POWER: This laser engraving and cutting machine comes with a YL 100W CO2 laser tube to cut through thick materials and engrave your designs faster, deeper, and clearer.
    • RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8.
    • USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs.
    • LCD DISPLAY: A secondary display panel monitors the real-time electric current in milliamps and auto-judges fault, easing the troubleshooting process and reducing potential damage to the laser tube and power supply. Plus, it’s accessibly located on the left side of the machine.
    • LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life. 
    • MOTORIZED Z-AXIS: An electric lift powers the workbed's ascent/descent function, allowing effortless platform height adjustment to accommodate bulky objects and help you focus the laser head.
    • VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure.
    • RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.
    • ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75” or be fully retracted, allowing more control over different focal distance setups.
    • AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
    • FOUR-WAY PASS-THROUGH: There’s always extra room! Equipped with front, side, and rear pass-through doors to accommodate materials larger than the table size. Front-to-Back Doors: 40¾″W × 1⅞″H, Side-to-Side Doors: 28⅝″W × ¾″H
    • BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.
    • WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60–70°F (16–21°C).
    • WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. 
    • AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation.
    • EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machine’s cleanliness and easing the cleanup process.

    Package Includes:

    • 1 x Laser Engraver
    • 10 x Hex Wrenches
    • 1 x Grounding Wire
    • 1 x USB Cable
    • 1 x Ethernet Cable
    • 1 x Power Cord
    • 1 x Water Pump
    • 1 x Roll of Double-Sided Tape
    • 1 x Exhaust Pipe
    • 1 x Hose Clamp
    • 1 x Water Pipe
    • 2 x Keys
    • 1 x USB Flash Drive (with Software)
    • 1 x Accessory Bag
    • 1 x Instruction Manual

    Warranty:

    • No need to worry! We offer a 1-year warranty on all refurbished machines.
    • 3-month warranty on consumables (i.e. laser tube and power supply)

    Certifications:

    • FDA Compliant
    • CE Certification
    • ISO9001 Quality Certification

    Compatible Materials:

    Laser Cutting:

    • Acrylic
    • *Wood
    • Leather
    • Plastics
    • Fabrics
    • MDF
    • Cardboard
    • Paper
    • Corian
    • Foam
    • Fiberglass
    • Rubber

    Marking/Engraving:

    • Acrylic
    • Wood 
    • Leather
    • Plastics
    • Fabrics
    • Glass
    • Rubber
    • Cork
    • Brick
    • Granite
    • Marble
    • Tile
    • River Rock
    • Bone
    • Melamine
    • Phenolic
    • *Aluminum
    • *Stainless Steel
    • *Titanium

    *Cannot cut hardwoods like mahogany

    *CO2 lasers only mark bare metals when anodized or treated.

    Contact us with questions on specific materials not listed, we can process a sample for confirmation.

    Some PVC-based acrylics can create toxic fumes when lasered.