Before you begin your OMTrade application, please prepare the following files and information to quicken the process:
The following models are eligible for trade-in:
MF1220-50 - 50W CO2 WITH 12” X 20” WORKING AREA
MF1220-50R - 50W CO2 WITH 12” X 20” WORKING AREA WITH ROTARY AXIS
MF1624-55 - 55W CO2 WITH 16” X 24” WORKING AREA
MF2028-60 - 60W CO2 WITH 20” X 28” WORKING AREA
AF2028-60 - 60W CO2 WITH 20” X 28” WORKING AREA (AUTO FOCUS)
ZF2028-60 - 60W CO2 WITH 20” X 28” WORKING AREA (MOTORIZED Z)
AF1630-70 - 70W CO2 WITH 16” X 30” WORKING AREA (AUTOFOCUS)
AF2028-80 - 80W CO2 WITH 20” X 28” WORKING AREA (AUTOFOCUS)
AF2435-80 - 80W CO2 WITH 24" X 35" WORKING AREA (AUTO FOCUS)
ZF2440-80 - 80W CO2 WITH 24” X 40” WORKING AREA (DUAL LASER TUBES AND LASER HEADS)
MF2028-100 - 100W CO2 WITH 20” X 28” WORKING AREA
ZF2435-100 - 100W CO2 WITH 24"X35" WORKING AREA
AF2440-100 - 100W CO2 WITH 24" X 40" WORKING AREA (AUTO FOCUS)
ZF3551-100 - 100W CO2 WITH 35” X 51” WORKING AREA (DUAL LASER TUBES AND LASER HEADS)
AF3555-130 - 130W CO2 WITH 35” X 55” WORKING AREA (AUTO FOCUS)
AF4063-150 - 150W CO2 WITH 40” X 63” WORKING AREA (AUTO FOCUS)
If you purchased your laser machine from either the OMTech website, Amazon, eBay, or Walmart, please gather your original order number.
Please locate and keep record of your laser machine's serial number. This can be located either at the back of your machine or on top next to the control panel. You will locate a silver plaque, reading the machine's serial number.
-All sides of the machine (4 images for each).
-The machine's interior (4-6 images).
-The machine's feet/casters (4 images for each).
-The machine's electrical panel (1-3 images).
-Cosmetic damage of the machine (4-6 images) *If applicable.
-The machine powering on and homing properly (1 video).
-The gantry moving to all four corners of the workbed (1 video).
-The workbed rising and lowering to its z-axis limit (1 video).
-The machine engraving and cutting a small project (1-2 videos) *If the laser tube is operable.
Before starting our user-friendly trade-in process, prepare the list of items mentioned down below. From there, you can complete the application within minutes!
OMTech specialists will virtually analyze your machine to provide an accurate estimate. After we receive your machine, we’ll conduct a thorough in-person inspection to make a fair final quote.
Don’t sweat on shipping your machine! Your trade-in includes free shipping and handling on any approved machine.
Once your application is approved, we’ll send you a reinforced OMTech crate to ship your trade-in. We’ll need to place a hold on your credit card for the crate (these beasts aren’t cheap) until we receive your package at Anaheim Warehouse.